APTDF430U100G APTDF430U100G C rev 2 october, 2012 www.microsemi.com 1-4 absolute maximum ratings symbol parameter max ratings unit v r maximum dc reverse voltage v rrm maximum peak repetitive reverse voltage 1000 v t c = 25c 500 i f(av) maximum average forward current duty cycle = 50% t c = 80c 430 i f(rms) rms forward current 850 i fsm non-repetitive forward surge current t j = 25c 5000 a these devices are sensitiv e to electrostatic discharge. proper handling procedures should be followe d. see application note apt0502 on www.microsemi.com all ratings @ t j = 25c unless otherwise specified electrical characteristics v ces = 1000v i c = 430a @ tc = 80c application ? anti-parallel diode - switchmode power supply - inverters ? snubber diode ? uninterruptible power supply (ups) ? induction heating ? welding equipment ? high speed rectifiers ? electric vehicles features ? ultra fast recovery times ? soft recovery characteristics ? very low stray inductance ? high blocking voltage ? high current ? low leakage current benefits ? low losses ? low noise switching ? direct mounting to heatsink (isolated package) ? low junction to case thermal resistance ? rohs compliant single diode power module downloaded from: http:///
APTDF430U100G APTDF430U100G C rev 2 october, 2012 www.microsemi.com 2-4 symbol characteristic test conditions min typ max unit i f = 500a 2.0 2.3 i f = 1000a 2.5 v f diode forward voltage i f = 500a t j = 150c 1.8 v t j = 25c 2500 i rm maximum reverse leakage current v r = 1000v t j = 150c 5000 a c t junction capacitance v r = 200v 580 pf dynamic characteristics symbol characteristic test conditions min typ max unit t rr1 i f =1a,v r =30v di/dt = 15a/s t j = 25c 80 95 t rr2 t j = 25c 100 120 t rr3 reverse recovery time i f = 500a v r = 540v di/dt=1000a/s t j = 100c 200 300 ns t fr1 t j = 25c 135 t fr2 forward recovery time t j = 100c 200 ns i rrm1 t j = 25c 35 50 i rrm2 reverse recovery current t j = 100c 65 85 a q rr1 t j = 25c 1.75 3 q rr2 reverse recovery charge t j = 100c 6.5 12.8 c v fr1 t j = 25c 31 v fr2 forward recovery voltage t j = 100c 31 v t j = 25c 1000 d im/dt rate of fall of recovery current i f = 500a v r = 540v di/dt=1000a/s t j = 100c 500 a/s thermal and package characteristics symbol characteristic min typ max unit r thjc junction to case thermal resistance 0.08 c/w v isol rms isolation voltage, any terminal to case t =1 min, 50/60hz 4000 v t j operating junction temperature range -40 150 t stg storage temperature range -40 125 t c operating case temperature -40 100 c to heatsink m5 2.5 3.5 torque mounting torque for terminals m6 3 4 n.m wt package weight 250 g downloaded from: http:///
APTDF430U100G APTDF430U100G C rev 2 october, 2012 www.microsemi.com 3-4 lp4 package outline (dimensions in mm) downloaded from: http:///
APTDF430U100G APTDF430U100G C rev 2 october, 2012 www.microsemi.com 4-4 disclaimer the information contained in the document (unless it is publicly available on the web without access restrictions) is proprietary and confidential information of microsemi and cannot be copied, published, uploaded, posted, transmitted, distributed or disclosed or used without the express duly signed written consent of microsemi. if the recipient of this document has entered into a disclosure agreement with microsemi, then the terms of such agreem ent will also apply. this document and the information contained herein may not be modified, by any person other than authorized personnel of microsemi. no license under any patent, copyright, trade secret or other intellectual property right is granted to or conferred upon you by disclosure or delivery of the information, either expressly, by implication , inducement, estoppels or otherwise. any license under such intellectual property rights must be approved by microsemi in writing signed by an officer of microsemi. microsemi reserves the right to change the configuration, functionality and performance of its products at anytime without any notice. this product has been subject to limited testing and should not be used in conjunction with life- support or other mission-critical equipment or applications. microsemi assumes no liability whatsoever, and microsemi disclaims any express or implied warranty, relating to sale and/or use of microsemi products including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property right. any performance specifications believed to be reliable but are not verified and customer or user must conduct and complete all performance and other testing of this product as well as any user or custo mers final application. user or customer shall not rely on any data and performance specifications or parameters provided by microsemi. it is the customers and users responsibility to independently determine suitability of any microsemi product and to test and verify the same. the information contained herein is provided as is, where is and with all faults, and the entire risk associated with such information is entirely with the user. microsemi specifically disclaims any liability of any kind including for consequential, incidental and punitive damages as well as lost profit. the product is subject to other terms and conditions which can be located on the web at http://www.microsemi.com/legal/tnc.asp life support application seller's products are not designed, intended, or authorized for use as components in systems intended for space, aviation, surgical implant into the body, in other applications intended to support or sustain life, or for any other application in which the failure of the seller's product could create a situation where personal injury, death or property damage or loss may occur (collectively "life support applications"). buyer agrees not to use products in any life support applications and to the extent it does it shall conduct extensive testing of the product in such applications and further agrees to indemnify and hold seller, and its officers, employees, subsidiaries, affiliates, agents, sales representatives and distributors harmless against all claims, costs, dam ages and expenses, and attorneys' fees and costs arising, directly or directly, out of any claims of personal injury, death, damage or otherwise associated with the use of the goods in life support applications, even if such claim includes allegations that seller was negligent regarding the design or manufacture of the goods. buyer must notify seller in writing before using sellers products in life support applications. seller will study with buyer alternative solutions to meet buyer application specification based on sellers sales conditions applicable for the new proposed specific part. downloaded from: http:///
|
